NORRENZO 360
 
  • Overview
  • Specification
  • Price List
  • Gallery
  • FAQ
Front View
Back View
 

Convert your MR-Spyder into an Italian Thorough-bred Sports car with our specially designed bodykit.

You get :-

To enjoy Italian Sport Car design and style without the high maintenance cost.
To enjoy the Japanese relaibility and performance of your original MR -Spyder.
To build your own DREAM CAR for a fraction of the cost of the original at the same time experience the sense of acheivement and pride of building your dream car.
To be able to revert back to your MR-Spyder specification if you decide to sell the car.
Yes, the kit is a bolt on job. TOTALLY REVERSIBLE !!
 
Quality in Fine Details ( built to a high level of fit and furnish )

 
  Bonnet Kick-up feature,
also note the OEM level
of fit and furnish.
Curvaceous Door
Panel with consistent
door shut lines.
Consistent rear panel
and bumper gap lines.
       
1) Dimensions  
   
NORRENZO 360
  Length (mm)
4330
  Width (mm)
1920
  Height (mm)
1240

2)

The Kit
  The kit is manufactured in high quality fibreglass (frp/composite). We have 20 years experience in making fibreglass parts for the automotive industry (OEM) and the parts are manufactured under ISO 9001:2000 quality management systems. All our manufactured parts are of very high quality. (Please refer to ' price list ' for listing of parts components.) Carbon Fibre version of the kit available on request.
   
3) Special Features
 
i)
OEM quality level of fit and finish means tight consistent gap and shut-lines for all panels and openings.
   
 
ii)
High quality, accurate and consistent parts ensure hassle free installation.
   
 
iii)
All doors, bonnet and boot are factory bonded as a complete unit and double-skinned where applicable saving you time and effort during your built-up.
   
 
iv)
The rear boot is a complete piece by itself incorporating fitment for the original MR-Spyder 3rd brake light.
   
 
v)
When installed with our special door hinges(available only when purchased together with our kit ), the door swings outwards.
 


1)

Full Panel Kit ( Fibreglass) Price : USD6500.00
  Panel Kit Set contains the folowing component parts :-
 
  1. Front Bumper with bumper support bonded -in
  2. Rear Bumper with bumper support bonded - in
  3. Left -hand Front Wing
  4. Right-hand Front Wing
  5. Front Fill Panlel between Wings
  6. Left-hand Door Skin with inner support piece bonded-in
  7. Right-hand Door Skin with inner support piece bonded- in
  8. Left-hand Rear Wing/sill
  9. Right-hand Rear Wing /sill
  10. Outer Bonnet with inner skin bonded - in
  11. Outer Boot with inner skin bonded -in
  12. Rear Light Panel
  13. 3 pcs Roof Cover
  14. Left-hand Windscreen Surround
  15. Right-hand Windscreen Surround
  16. Left-hand Exterior Door handle
  17. Right-hand Exterior Door handle
   
2) Carbon Fibre Version of the above available upon request.
   
3) Turnkey Cars built to your specification,Call us for a Quote.
   
4) Other Parts
  a) Mounting Frames which contains :- USD550.00
       - Front steel mounting frame
       - Rear steel mounting frame
   
  b) Suspension Pack which contains :- USD650.00
       - A pair of front wishbone
       - Steering track rod-end extension
       - Front damper adjustment bracket
   
  c) Wing Mirror Set (F430 style) which contains :- USD350.00
       - Left-hand and right-hand wing mirrors
   
  d) Rear light set which contains :- USD450.00
       - A full set of 4 rear lights
   
  e) Head light set which contains :- USD750.00
       - 2 x Fibreglass moulding
       - 2 x Perplex cover
       - 2 x Indicator Light Unit
       - 2 x Mainbeam & sidelight units
       - 2 x Dropped Beam light unit
   
  f) Special Door Hinges which contains :- USD800.00
       - Left-hand door hinge
       - Right-hand door hinge
       (available only when purchased together with our kit)
 


     
 
 
 
     
1) WHAT ARE THE ADVANTAGES OF OUR 'TOTALLY REVERSIBLE KIT' CONCEPT?
We have designed the Kit to be 100% bolt-on i.e no need to cut and weld on any part of the original car.

Firstly, this will be a great relief to all MR-Spyder owner as there is NO damage or modification whatsoever done to their beloved and cherished 'ride'. You do not have to cut up your precious car e.g. chopping of the roof to fit this Kit. Such modification often renders the car UNSAFE with lost of structural strength of the original monocoque. Many road transport departments certainly frown upon such drastic modifications.

Secondly, this will allow the Kit to pass many different country's road transport regulations and inspections as there are NO modifications to the chassis structure. Many road transport departments in various countries do not approve of Kit cars for fear of shoddy modifications rendering the vehicle unsafe.

Thirdly, if you decide to sell your car you can have the option of reverting your car BACK to the original specifications or transfering your entire Kit to another (newer) MR-Spyder if you wish to.

   
2) HOW DOES THE KIT LOOK COMPARED TO THE REAL THING?
The Kit is a very close replica of the real car. You can say that it is a short-wheel base version, normally developed as the 'Racing Version'!
Many race car have shorter wheel base than their road-going version so as to improve agility and turning-in response. Final verdict, IT LOOK SO GOOD!
   
3) WHAT ABOUT THE RUNNING COST OF MAINTAINING THE CAR?
With the Kit fitted, you can now truly enjoy the great looks and style of a thorough-bred italian sports car WITHOUT its high running cost. You get Japanese car reliability and running economy of 1.8litre engine coupled with sporty performance.
   
4) HOW DOES IT FEEL TO DRIVE THE FORZA RACING?
With the wider tracks the car feels very stable and safe, giving it an enhanced BIG Sports Car feeling. By having an original mid-engine layout you still get to enjoy the good handling traits of the MR-Spyder which has been improved further by the wider tracks to give you a truly BIG go-kart feeling.
   
5) HOW IS THE QUALITY OF THE FIBREGLASS PARTS?
You can be assured that you get top OEM quality fibreglass parts. We have 20 years manufacturing experience in producing fibreglass parts for the automotive industry. The parts are manufactured under ISO 9001:2000 quality management systems.
   
6) HOW EASY IS IT TO BUILD-UP THE KIT?
Very Easy! You don't need any special tools nor special fibreglass knowledge, just basic workshop tools and spanners.

Firstly, because of the high quality of the parts i.e. very accurate and all the messy bonding done by the factory, it save you a lot of time, effort and heartache to build up the Kit. Unlike other Kits you are not faced with distorted parts that won't fit properly or having to bond the outer with the inner skin where you haven't the slightess clue of what is fibreglass is all about nor the tools to do it properly.